You're currently on:
Pigtronix Infinity is the world’s most musical looping pedal. Simple to operate, yet tremendously powerful and flexible, the Infinity Looper from Pigtronix sets a new world standard for latency-free looping. Our state-of-the-art looping platform provides instantaneous record, playback, dub, undo and redo, on two stereo loop pairs that can be configured in several ways. On top of superior speed and a unique, performance friendly feature set, Infinity Looper sounds downright incredible thanks to its discreet analog limiter stages, transparent analog pass-through and 24bit / 48kHz HD recording engine.
Infinity’s innovative “SYNC MULTI” mode provides a multiplier function allowing the length of Loop 2 to be 1, 2, 3, 4 or 6 times the length of Loop 1. The two loops can also be run out of sync or even in SERIES, for verse / chorus song structures. Ninja style input split mode assigns Input 1 to Loop 1 and Input 2 to Loop 2, effectively allowing performers to record and overdub separate instruments on separate loops, into isolated amps simultaneously.
The Pigtronix Infinity also provides a long awaited AUX Loop output intended to send looped audio to stage monitors. This is especially helpful for drummers to hear and stay in time. An expression pedal jack for Loop Volume allows hands free control of the overall audio output. We thought of everything and kept only the F.A.T.
Midi input for beat clock sync causes loop start and stop points to obey Pro Tools or any other DAW / Sequencer that outputs Midi. The Infinity’s USB access allows you to and transfer your music to a computer at full 24bit, 48kHz resolution for further mixing, mastering or immediate publication. We have also implemented audio upload with automatic format conversion, allowing you to upload virtually any digital audio file onto the Infinity Looper.
THE MUST HAVE PIGTRONIX for any musician. The Infinity Looper will inspire compositional depth and engaging performances; it is the ultimate practice and performance tool for every style of music.
FEATURES
- 2 Stereo Loops with Sync
- Loop 2 Multiplier x1, x2, x3, x4, x6
- Series or Parallel Looping Modes
- 9 loop presets + 1 blank canvas
- 24bit / 48kHz recording
- Latency Free Looping
- Analog pass through of clean tone
- USB access to saved loops
- Supports upload of virtually ANY audio format via USB
- Input Split for recording separate instruments on each loop
- Remote switch for Dub UNDO / REDO (erase / replace) last overdub
- Supports 256 (or more) overdubs per loop
- Aux Loop Out for Drum Monitor
- Expression Pedal for Loop audio volume
- Midi Beat Clock Sync
- All commands are instantaneous
- 5 Stop Modes for flexible performance options
- 18VDC power supply included
- USB-A to microUSB cable included
- Chassis Size = 7.4” x 4.6” x 1.5”
PEDAL POWER 2 PLUS
After extensive testing for both noise, stability and reliability we have pleasure in recommending the Voodoo Lab Pedal Power 2 Plus as being suitable for powering our range of stand alone pedals - particularly when multiple effects are in use. The isolated outputs of the Pedal Power 2 Plus prevent the occurrence of ground loops and the noise level is too low to measure. 
-Pete Cornish
AMAZING TONE STARTS WITH PEDAL POWER!
Filter, regulate, isolate, and protect! Pedal Power® 2 Plus does it, and does it well, because any less will degrade your pedal’s performance. Players everywhere upgrade to Pedal Power 2 Plus because it powers what conventional power supplies can’t. Pedal Power 2 Plus is hand made in the U.S.A., comes complete with cables, detachable AC power cord, a 5-year warranty, and simply makes you sound better!
I’ve wrestled with various store-bought and custom-made power supplies over the years, but this was the first time I was able to connect everything in minutes and get great results without hum or profanity.
-Guitar Player Magazine
| POWERING PEDALS IS EASY. MAKING THEM SOUND GREAT ISN’T. |
Isolation is more than fixing ground loops.
Ground loops cause hum, and the solution is to break the unwanted ground path. Isolation is the best way to do it. Unlike other power supplies, Pedal Power 2 Plus isolates EVERY output. This eliminates tone robbing interaction between units. Now you can properly power everything from vintage overdrives to modern digital marvels that others just can’t!
Proprietary balanced transformer makes it possible.
A typical transformer, like those used in a wall wart, creates a large magnetic field that causes hum in any audio path near it. Pedal Power 2 Plus uses a custom designed, ultra-low noise toroidal transformer, with separate balanced windings for every output. Now even the most sensitive pedals can be dead quiet.
Switching power supplies aren’t for everything.
What’s good for charging a cell phone is NOT good for your pedals. While digital switching power supplies are small and inexpensive, they also generate unpredictable transients and extraneous noise. Pedal Power 2 Plus uses an audiophile quality linear supply for consistently stable, clean, pure power.
| Pedal Power® 2 Plus Features |
9/12V (x4) – Standard 9V and 12V Boss ACA
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Boss pedals that specify the PSA adapter operate at 9V like most other pedals. Boss pedals that require the ACA adapter operate at 12V which can be selected via switches underneath the Pedal Power 2 Plus. Any one of these outputs can be individually selected to run at 9V or 12V.
9V (x2) – High Current 9V and Line 6 Modelers
These two outputs each deliver 250mA allowing you to run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler. Via switches underneath the Pedal Power 2 Plus, these two outputs can be separately configured for regulated (Boss Twin Pedals) or unregulated (Line 6 Modelers) power allowing you to run both units if so desired. These outputs can also power any standard 9V effects as well.
9V (x2) – Standard 9V With Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V. This feature can be enabled via the bottom panel switches. The SAG control is mostly useful for transistor-based fuzz, octavia, and distortion circuits, as most modern opamp designs are minimally affected by variations in supply voltage. We recommend turning SAG off if you’re going to run digital pedals like delay, chorus, and reverb.
18V/24V – Using Custom Cables
All of the outputs on the Pedal Power 2 Plus (and the original Pedal Power) are completely isolated allowing you to create different voltages. You can run effects like the current MXR Flanger by combining two 9V outputs to create a single 18V supply. By switching two outputs into 12V ACA mode, you can join them together to create a 24V output for powering numerous Electro-Harmonix stompboxes including the Deluxe Memory Man.
| Variant | N/A |
