You're currently on:
1178
A perfectly emulated and enhanced FET compressor. Fast, characterful and versatile, it is the ultimate control for modern mixes
The most versatile FET compressor
A compressor that eats transients for breakfast, the 1178 is a rare and expensive legend of the recording studio, cleaner and more versatile than its older brother, the 1176. The 1178 has been used by great producers including Chris Lord-Alge (My Chemical Romance), Bob Clearmountain (Rolling Stones, Christina Aguilera), Yvan Bing (Phil Collins) and Nigel Godrich (Radiohead).
Our 1178 software (VST/VST3/AU/AAX) meticulously recreates the original 1178 hardware in its tonal color and compression character.
But we’ve taken the Pulsar 1178 further than the original unit, adding all the features you would expect from a modern, versatile plug-in, including a full sidechain EQ for added control, an optional saturation stage for warmth and character, and precise metering.
Improving on a classic
Pulsar 1178 has a fast and bright character, making it great for dealing with unruly transients in tracking and mixing. While these qualities make it the ideal choice to smash the transients of a drum room to get a nasty rocky bounce, the extended attack range also allows gentle dynamic contouring, and can provide unique mid-band definition and intelligibility on a vocal.
When it comes to compression, having more control over the sidechain signal can bring a mix to the next level. The dynamics of a drum groove hinge on how compression is triggered by both the kick drum and the snare. With Pulsar 1178’s full-featured sidechain EQ section, you can make each one hit just the right amount of gain reduction.
Keeping an eye on dynamics is key to a well balanced mix. Pulsar 1178’s accurate and modern metering section helps in this important task. Peak meters allow insight into overall dynamics; RMS meters let you monitor loudness and match levels; and a scrolling view helps visualize how the attack and release settings are affecting the gain reduction.
Add grit and drive to the usually-transparent 1178 with four flavors of saturation: Tape, Triode, Warm and Clip modes open up new ways of managing dynamics and spectral envelope. These modes are fully-integrated in the compressor’s gain reduction system, allowing a unique vibe, unachievable with pre or post saturations.
How does it sound ?
Snappy with a rich sound
More transparent than an 1176, the 1178 allows incredibly fast control over transients when compared to other compressor models. Add the all-buttons-in mode and Pulsar’s added saturation models, and you can access characterful, colorful tones as well.
Vocals
1178 is a great way to get vocals to pop out of a mix and sound very aggressive. Don’t take our word for it – Bob Clearmountain has used these circuits to do the business on vocals from Mick jagger, Christina Aguilera and more.
Drum Overheads
The 1178 has the speed to catch crashes in a flash, and also opens up the top end of a signal in a very natural-sounding way. Chris Lord-Alge uses this combination to great effect on “lacklustre overheads”. With Lookahead, you can get surgical with your drum transients too.
Bass
Whether you’re catching transients, controlling dynamics, or all-out smashing up the signal, bass is prime fodder for the 1178. Using our added Saturation circuits, you can really introduce extra grit, helping the bass to pop through a mix and survive on smaller speakers.
Acoustic guitar
Guitar transients can be particularly fast and harsh, and the 1178 is a great tool to dampen lively picking, as well as to make the body of the sound bounce and respond. Fast processing and natural release helps add life to a mix but retain natural guitar tone.
Buss and Master compression
Transparency and speed make the 1178 a good candidate for buss compression and even mastering compression (as on Robert Plant’s album Angel Dance). The added sidechain EQ is helpful in controlling the entire frequency spectrum – not just heavy bass.
Main Features
Topology Preservation Technology
Our modelling technology guarantees a perfect emulation of the original device’s behavior. From the saturation of diodes, transistors or tubes, to the slight internal filterings, to the tiny calibration defects, everything is perfectly reproduced. What’s more, we can reproduce all these behaviors without going through a complete simulation of the circuit, thus saving CPU power.
Saturation stage
Push the signal further using one of four saturation flavours, and adjust the processing strength. Tape emulates the character of magnetic recording technology; Warm offers subtle distortion that’s great for high frequencies; Triode emulates a Class A tube amp, adding mostly odd harmonics; Clip offer digital clipping for heavy-handed action.
Mid-Side processing
Pulsar 1178 comes with built-in optional M/S encoding and decoding, enabling a signal’s mono and stereo information to be processed separately with different settings. The Listen buttons simplify the setting by allowing you to listen to Mid or Sides signals in isolation, and the modern visualization can be set to monitor only the channel you’re working on, so you always know what you’re doing.
Look ahead, look behind
Bring the compressor’s detection action forward in time – practically impossible in an analogue signal path – or delay its action by up to 10ms to help transients to pop through. You set the exact timing of the Look-ahead or Look-behind delay stages, up to 20ms for the former or up to 10ms for the latter.
Powerful sidechain EQ
High-passing the sidechain is possible with Pulsar 1178, but so is a lot more, thanks to an entire sidechain EQ section. Five filter types are available here, as is band solo and sidechain audition to help perfectly tailor your signal and arrive at the ideal detection response.
External sidechain
Pulsar 1178 allows to define an external sidechain input, as all compressors should in the digital age. This opens a very wide range of applications: ducking, de-essing, filtering the sidechain signal with your favourite EQ, or even applying dynamic processing.
Advanced metering section
Gain reduction, input level and output level are all visible in different ways. The scrolling gain reduction meter offers a view of gain reduction and the audio signal; VU-style metering shows instantaneous gain reduction for both stereo channels; and LED-style input, output and gain reduction is available to calibrate peak and RMS loudness.
Smart GUI
Pulsar 1178 comes all wrapped up in a responsive and resizable interface. Just drag the resize handle to set it to your preferred size, from nice and compact to highly visible. What’s more, in most DAWs, loading Pulsar 1178 on a mono channel will open the plugin with a streamlined interface that shows only a single channel of operation.
| Variant | 1 |
